Product Overview

A. Used for data loggers. The digital sensor must be set to Lp_I2C mode, and the sensor unit must be configured in advance.
B. Dual power supply input is supported.
C. Powered by 3.3~28V DC. Capable of recording 131,072 data points; recording stops automatically when full.
D. Connect the digital sensor to the circuit board: red wire to Red; solder the remaining wires in sequence.
E. The silk‑screened markings “+” and “–” form one set of power input terminals; Vb and “–” form the second set.
F. When used with a digital sensor, accuracy of 0.1%FS or 0.05%FS can be achieved.